UDP/IP
controlled
New version : Released 14th April 2008
The
Ether I/O 24 R is an UDP/IP controlled digital
Input/Output module. The module features
three 8-bit ports with 5V level signal lines.
Each of the 24 lines can be independently
programmed as either an input or output.
The module connects to any Ethernet network
supporting the TCP/IP protocol suite and
can communicate with any point on that network.
By connection with an Internet Router the
device can communicate with any Internet
connected device
- Supports ARP, BOOTP, DHCP, ICMP and
UDP/IP Protocols
- Industry standard 10BaseT Ethernet Interface
with an industry standard RJ-45 Connector
- 24 independently programmable signal
lines with configurable CMOS, TTL or Schmitt
Trigger thresholds and programmable pull-ups
per line
- Easy connection by three 10 way box
headers to suit low cost, standard IDC
or Crimp connectors
- Integrated Switch Mode Voltage Regulator
allows power from any 8-32V DC Power source
- User 5V 500mA output to power external
Interface boards or sensors
- Compact module measures only 72mm x
72mm x 24mm
- Advanced configuration allows the modules
to automatically scan the input ports
and transmit
changes directly to another ETHER I/O
24 R module without host connection or to
any Internet Port
by router connection
- On board EEPROM allows all ports to
power up in a user programmable state
- Programmable Fixed IP or Dynamic IP
assignment from a DHCP server
- Small packet size and connectionless
protocol allows for Real Time sensing
and control
- Can be connected to a wireless network
gateway or access point for wireless operation
- Low Power consumption only 1.1W fully
operational
APPLICATIONS
- Home or Industrial Automation
- Digital Input and Output from any Networked
PC
- Remote Data Acquisition and/or Alarm
Monitoring by Network or Internet
- PC Controlled Machines and Distributed
Machine I/O
- Remote Lighting / Power control and/or
monitoring
Ether
I/O 24 RTest and Programming Utility
Data
Sheets and Utility
|
